Audient iD22 power supply replacement
Barring the occasional power-on lockup, my interface has been stable and never caused any issues. However, some people have commented that the provided power supply is under-spec’d. They aren’t wrong:
| iD22 PSU | Recommended | Supplied |
|---|---|---|
| Mnfr. | – | Xing Yang Electronics |
| Part Num | – | XY-1201250-Z |
| Voltage | 12V | 12V |
| Amperage | 1.5A | 1.25 A |
| Inner Diam | 2.1 mm | 2.1 mm |
| Outer Diam | 5.5 mm | 5.5mm |
| Length | 10mm | 10mm |
| Polarity | Center Pos. | Center Pos. |
Mousers’ Parametric Search Returns the following potential replacements:
| Mfr PN | Mouser PN | Qty.1 | |
|---|---|---|---|
| CUI | SWI24-12-N-P5 | 490-SWI24-12-N-P5 | $16.97 |
| Delta Electronics | MDS-030AAC12 AB | 108-MDS-030AAC12AB | $24.93 |
| Triad Magnetics | WSU120-2000 | 553-WSU120-2000 | $14.41 |
Probably not a bad idea to upgrade this on the next mouser purchase.